Sharp XG-E1200U 운영 매뉴얼 - 페이지 18
{카테고리_이름} Sharp XG-E1200U에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp XG-E1200U 40 페이지.
페이지 인쇄4
RGB
B
5
INPUT1
COMPUTER
RGB
Direct
connection
External IBM-PC
monitor
MOUSE
FOR PC98
WIRED
REMOTE
OUTPUT
AUDIO OUTPUT
COMPUTER
AUDIO IN
L
R
INPUT2
DC5V OUTPUT
MAX CURRENT 1A
H
V
OUTPUT
Optional Macintosh
adaptor cable
U.S.A. ONLY
or
External Macintosh
monitor
3. Connecting to other compatible
computers
When connecting the projector to a compatible computer
other than an IBM-PC (VGA/SVGA/XGA) or Macintosh
series, a separate cable is needed. Please contact your
dealer for ordering information.
Notes:
Connecting computers other than the recommended types
may result in damage to the projector, the computer, or both.
Connect the audio from the computer to the COMPUTER
AUDIO INPUT terminal.
4. Connecting to the COMPUTER AUDIO
INPUT
The COMPUTER AUDIO INPUT accepts COMPUTER RGB
input.
Connect a 3.5 mm Stereo Minijack-RCA L/R cable (not
included) from the audio output terminal on the computer to
the COMPUTER AUDIO IN terminal on the projector.
5. Connecting an external monitor
Connect your computer monitor to the projector's COM-
PUTER RGB OUTPUT terminal to view images simulta-
neously on the external monitor and the projection
screen. Select either RGB 1 or RGB 2 to output the
images to the monitor.
Caution (Apple Macintosh):
Do not connect the COMPUTER RGB OUTPUT to any
monitor except the following:
Apple Color RGB Monitor 13"/14" (640
16"/17" (832
624)
The output signal from the projector to the monitor should be
the same as the input signal from the computer to the
projector.
Example: Input 13"/14" (640
Input 16"/17" (832
Note:
The supplied adaptor is only for use with H-SYNC and V-SYNC output. No
picture will appear when connected to monitors that only use C-SYNC.
Notes:
When using the projector with an external IBM-PC monitor, connect
the monitor using the supplied cable. When using the projector with a
Macintosh monitor, an optional adaptor cable is required. Before using
any other type of monitor, carefully check the monitor's interface
specifications and make sure that they match the specifications of the
projector's interface.
The external monitor output will only display an analog computer input
signal. It will not display a digital or video input signal. To split the
composite video signal, use a video distribution amplifier. This is
available from your local dealer. The computer RGB output will only
loop through the same signal connected to the computer RGB input.
(VGA IN
VGA OUT, Mac IN
480) or
480)
Output (640
480)
624)
Output (832
624)
Mac OUT)
E-18