Sharp XG-E1200U 운영 매뉴얼 - 페이지 25
{카테고리_이름} Sharp XG-E1200U에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp XG-E1200U 40 페이지.
페이지 인쇄Adjusting the Picture
1
On-Screen Display
R G B 1
A D J .
R G B
I N P U T
I M A G E
A D J .
A U D I O
S Y S T E M
S E T U P
L A N G U A G E
: S E L .
2
R G B 1
A D J .
P I C T U R E
B R I G H T
R E D
B L U E
R E S E T
M E M O R Y S E L E C T
: S E L .
: A D J .
3
P I C T U R E
: S E L .
: A D J .
E-25
A D J .
ENTER
: N E X T
: E N D
MENU
0
-
+
0
-
+
0
-
+
0
-
+
ENTER
: N E X T
MENU
: E N D
0
-
+
ENTER
: E N T E R
: E N D
MENU
This projector's picture is factory preset to standard
settings. However, you can adjust it to suit your own
preferences with the ADJUSTMENT buttons on the
projector and the remote control.
The adjustments can be memorized in RGB 1, RGB 2
or VIDEO separately.
Four picture modes can be adjusted: "PICTURE,"
"BRIGHT," "RED," and "BLUE."
Adjusting the Picture
1. Use the MENU button to select the mode
to be adjusted.
When the MENU button is pressed, the MENU mode is
indicated for about 30 seconds. Press the ADJUST-
MENT / buttons to select RGB1 ADJ., then press the
ENTER button.
2. Adjust the Picture
Press the ADJUSTMENT / buttons to highlight yellow
the picture adjustment item you want to adjust.
Press the ADJUSTMENT
mark of the selected adjustment item to the desired
setting.
The adjustment mode is displayed for about 30
seconds.
Description of Adjustment Items
Selected item
ADJUSTMENT
PICTURE
For less contrast
For less brightness
BRIGHT
RED
For weaker red
BLUE
For weaker blue
COLOR
For less color intensity
TINT
Skin tones become purplish
SHARPNESS
For less sharpness
RESET
All RGB Video Adjustment items are returned to the factory preset settings.
Note: To reset all adjustment items, select RESET in
"RGB1 ADJ. " mode and press the ENTER button.
3. Display only the item to adjust.
Press the ADJUSTMENT / buttons to highlight yellow
the picture adjustment item you want to adjust. If you
press the ENTER button at this time, only the selected
item will be displayed.
Press the ADJUSTMENT
mark of the selected adjustment item to the desired
setting.
The adjustment mode is displayed for about 30
seconds.
Notes:
When a VIDEO signal input has been selected, only "PIC-
TURE," "BRIGHT," "COLOR," "TINT" and "SHARPNESS" can
be adjusted.
TINT only appears in NTSC mode.
4. Press the MENU button anytime to exit
RGB ADJ.
/
buttons to move the " "
button
ADJUSTMENT
button
For more contrast
For more brightness
For stronger red
For stronger blue
For more color intensity
Skin tones become greenish
For more sharpness
/
buttons to move the " "