Sharp XG-F315X 설정 매뉴얼 - 페이지 15

{카테고리_이름} Sharp XG-F315X에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp XG-F315X 34 페이지. Xga data projectors
Sharp XG-F315X에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 사양 (2 페이지)

페이지 인쇄

Controlling the Projector via LAN

After connecting the projector to your network, enter the projector IP address in "Address"

on Internet Explorer (version 5.0 or later) using a computer on the network to start a setup

screen that will enable control of the projector via the network.

Controlling the Projector

Using Internet Explorer

(Version 5.0 or later)

Complete connections to external equipment

before starting the operation. (See pages 21-

25 of the projector's operation manual.)

Complete the AC cord connection. (See page

25 of the projector's operation manual.)

Note

• When connecting the projector to the LAN, use

a LAN cable (Category 5). When connecting the

projector to a hub, use a straight-through cable.

Start Internet Explorer (version 5.0

or later) on the computer.

Enter "http://" followed by the

projector IP address set by the

procedure on page

by "/" in "Address", and then

press the "Enter" key.

• When "DHCP Client" is set to "OFF" on

the projector, IP address is

192.168.150.2. If you did not change the

IP address in "3. Setting up a Network

Connection for the Projector" (pages

13-14), enter "http://192.168.150.2/".

A screen for controlling the pro-

jector appears, ready for per-

forming various status condi-

tions, control, and settings.

followed

-15