Sharp XG-F315X 설정 매뉴얼 - 페이지 23
{카테고리_이름} Sharp XG-F315X에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp XG-F315X 34 페이지. Xga data projectors
Sharp XG-F315X에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 사양 (2 페이지)
페이지 인쇄
Enter number or symbol of item to be selected on the SETUP MENU. When setting, input the
details to be set. Setting is carried out one item at a time, and saved at the end.
View Setting Detail List
([V]View All Setting)
▼SETUP MENU
---------------------------------SETUP MENU--------------------------------
[1]IP Address
[2]Subnet Mask
[4]User Name
[5]Password
[6]RS-232C Baud Rate [7]Projector Name [8]DHCP Client
[A]Advanced Setup
[V]View All Setting
[S]Save & Quit
setup>v
Model Name
: XX-XXXX
Projector Name
: XX-XXXX
MAC Address
: XX:XX:XX:XX:XX:XX
DHCP Client
: Disable
IP Address
: 192.168.150.2
Subnet Mask
: 255.255.255.0
Default Gateway
: Not Used
RS-232 Baud Rate : 9600 bps
Password
: Not Required
**********(Advanced Status)**********
Data Port
: 10002
Accept IP Address : Accept All
Auto Logout Time
: 5 minutes
Search Port
: 5006
1 1 1 1 1 Enter "v" and press the "Enter" key.
Display all setting values(*).
Setting up the Projector Using RS-232C or Telnet
[3]Default Gateway
[D]Disconnect All
[Q]Quit Unchanged
1
*
Set Items
Example: When setting IP Address (change from
192.168.150.2 to 192.168.150.3)
▼SETUP MENU
---------------------------------SETUP MENU--------------------------------
[1]IP Address
[2]Subnet Mask
[4]User Name
[5]Password
[6]RS-232C Baud Rate [7]Projector Name [8]DHCP Client
[A]Advanced Setup
[V]View All Setting
[S]Save & Quit
setup>1
IP Address
: 192.168.150.2
Please Enter
: 192.168.150.3
(change)
—> 192.168.150.3
---------------------------------SETUP MENU--------------------------------
[1]IP Address
[2]Subnet Mask
[4]User Name
[5]Password
[6]RS-232C Baud Rate [7]Projector Name [8]DHCP Client
[A]Advanced Setup
[V]View All Setting
[S]Save & Quit
setup>v
Model Name
: XX-XXXX
Projector Name
: XX-XXXX
MAC Address
: XX:XX:XX:XX:XX:XX
DHCP Client
: Disable
IP Address
: 192.168.150.3
Subnet Mask
: 255.255.255.0
Default Gateway
: Not Used
RS-232C Baud Rate : 9600 bps
Password
: Not Required
**********(Advanced Status)**********
Data Port
: 10002
Accept IP Address : Accept All
Auto Logout Time
: 5 minutes
Search Port
: 5006
1 1 1 1 1 Enter "1" (number of item to be set), and press
the "Enter" key.
Display current IP address (*1).
2 2 2 2 2 Enter IP address to be set and press the "En-
ter" key.
Display IP address after change (*2).
3 3 3 3 3 Enter "v" and press the "Enter" key to verify
setting detail list.
IP address is being changed (*3).
Note
• Verification of setting detail list can be omitted.
• Setting details are not effective until they have
been saved. (Page 24)
• If an invalid number is entered, an error message
("Parameter Error!") will be displayed.
[3]Default Gateway
[D]Disconnect All
[Q]Quit Unchanged
1
*1
2
*2
[3]Default Gateway
[D]Disconnect All
[Q]Quit Unchanged
3
*3
-23