Sharp XG-V10WM guide 네트워크 구성 매뉴얼 - 페이지 8

{카테고리_이름} Sharp XG-V10WM guide에 대한 네트워크 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp XG-V10WM guide 19 페이지. How to connect to a network
Sharp XG-V10WM guide에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지)

페이지 인쇄
Sharp XG-V10WM guide 네트워크 구성 매뉴얼
3.) The third option to be configured is "Subnet Mask" When that option is selected, the following
menu will appear.
NOTE: The fields following "SubNet Mask" will be blank if the LAN Card is used for first time.
(For Example Only)
NOTE: The "Subnet Mask" address used is an example ONLY . This information is obtained
through the IT / MIS Department.
A "Subnet Mask" is a portion of a network that shares a common address component. On most
networks, subnets are defined as all devices whose IP addresses have the same prefix. For
example, all devices with IP addresses that start with 100.100.100. would be part of the same subnet
Dividing a network into subnets is useful for both security and performance reasons.
IP networks are divided using a subnet mask.
NOTE: IP Address, Gatway Set, Subnet Mask addresses must be obtained from
IT / MIS Department.
NOTE: When the LAN board is installed the RS232C input control is disabled.
NOTE: On the XG-V10W/XU/M modified projectors the "Aux" connection becomes an
input for RS232.
8
10/16/2001
L:\tekcentr\CACTrain\SPS_ntwk