Sharp XG-V10WU 네트워크 구성 매뉴얼 - 페이지 14

{카테고리_이름} Sharp XG-V10WU에 대한 네트워크 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp XG-V10WU 19 페이지. How to connect to a network
Sharp XG-V10WU에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지)

페이지 인쇄

When the Projector Name option appears, you will notice that the "ID" number and the

port connection type is already identified. The SAPS software is reading the information

previously identified through the "Projector Setting" from the "File" menu option. (Refer to Figure 6)

For this example we are going to call our unit "Sharp's Unit". After entering the projector name,

depress the apply button which at this time will become active. Then depress the "OK" button.

Your unit now has a "Projector Name". This name can be anything to help the

Administrator identify the projector and or placement of the Unit. For example,

the projector could have been called "3rdFl ConRm" or " Cafeteria" depending on the

physical layout and or number of projectors involved. (Refer to Figure 10)

NOTE: the "Projector Name" field is limited to 12 Characters Maximum.

NOTE: the SAPS software can control up to 250 individual or grouped projectors.

Please refer to your SAPS operation manual for further details on grouping projectors.

After a "Projector / Unique Name" has been completed the changes will be reflected in the

All projector List" on the bottom of the "Multiple Projector" screen. (Refer to Figure 11)

L:\tekcentr\CACTrain\SPS_ntwk

Figure 10

Figure 11

10/16/2001