Digital Acoustics IP7-SS40 참조 매뉴얼 - 페이지 8
{카테고리_이름} Digital Acoustics IP7-SS40에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Acoustics IP7-SS40 20 페이지. Audio transformer
Digital Acoustics IP7-SS40에 대해서도 마찬가지입니다: 설치 지침 (2 페이지)
페이지 인쇄
There are two sets of pluggable DIN connectors (3.81mm centers) on
the SS40:
Connector
Signal
J1-1
Power +
24V DC
Power –
J1-2
GND
Connector Signal
J2-1
nc
J2-2
nc
J2-3
Line Out
J2-4
GND
J2-5
nc
J2-6
SPKR 8Ω+
SPKR 8Ω-
J2-7
SS40 J1 Connector
Notes
Note: The SS40 requires at least 60 watts of DC
power at 24 Volts to operate at maximum audio
power.
Warning: Connecting power to both the 2.1mm power
jack and the J1-1 and J1-2 power connectors at the
same time will damage the unit
SS40 J2 Connector
Notes
No Connection
No Connection
-10db with a 10k termination. Suitable for driving
powered multimedia speakers. Reference to J2-4
System Ground
No Connection
Floated* differential audio power amplifier output.
(*Do not apply either pin to ground)
5