Digital Acoustics IP7-MZC-FD 애플리케이션 매뉴얼 - 페이지 6

{카테고리_이름} Digital Acoustics IP7-MZC-FD에 대한 애플리케이션 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Acoustics IP7-MZC-FD 7 페이지.

Once a SIP call has been initiated, DTMF commands can be sent to the IP7-MZC-FD to:

● Turn on/off individual speakers and/or microphones in each audio zone

● Turn on/off pre-defined Zone Groups

● Activate the IP7-MZC-FD's onboard "double pole double throw" relay

Please note: T he IP7 only recognizes Out of Band DTMF codes

To activate the audio zones attached to the IP7-MZC-FD (Multi-Zone Controller), DTMF commands

may be sent across the active SIP channel

must be sent within 3000ms of the previous key or the command will timeout.

A #9 followed by 24 ASCII digits indicates the mics and/or speaker on each of the 12 Zone Extension

boards to be controlled:

● Two ASCII digits are used for each zone extension board. The first digit represents the 4 mics

and the second digit represents the 4 speakers

● Each ASCII digit is constructed as a hex "nibble" or four bits to indicate the audio path that

needs to be activated. So:

○ 0001 = 1 = 1st mic or speaker

○ 0010 = 2 = 2nd mic or speaker

○ 0100 = 4 = 3rd mic or speaker

○ 1000 = 8 = 4th mic or speaker

● The bits are added together resulting in a digit with value of 0 - F.

● If the resulting value is equal to 10 (hex A), substitute an (A) keypress

● If the resulting value is equal to 11 (hex B), substitute a (B) keypress

● If the resulting value is equal to 12 (hex C), substitute a (C) keypress

● If the resulting value is equal to 13 (hex D), substitute a (D) keypress

● If the resulting value is equal to 14 (hex E), substitute an asterisk (*) keypress

● If the resulting value is equal to 15 (hex F), substitute a pound sign (#) keypress

Here are a few examples:

● To turn on the 1st mic and 1st speaker on the first Zone Extension board, send

#9110000000000000000000000

● To turn on all four mics and all four speakers on the first Zone Extension board send

#9##0000000000000000000000

● To turn on the first speaker on the first and second Zone Extension board (zones 1 and 5), send

● #9010100000000000000000000

The selected Zones will stay activated till a new zone activation command is sent. The zones are

automatically deactivated when the SIP call is ended

SIP StandAlone

v ia software control or via the phone's keypad. Each digit

Page 6 of 7

37 Sherwood Terrace, Suite 111

Lake Bluff, IL 60044 U.S.A.

Tel 847-604-9256 Fax 847-604-9346