Crestron 4K DigitalMedia 3-Series 보충 설명서 - 페이지 11
{카테고리_이름} Crestron 4K DigitalMedia 3-Series에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Crestron 4K DigitalMedia 3-Series 20 페이지. Media presentation controller
Crestron 4K DigitalMedia 3-Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 매뉴얼에서 (2 페이지), 빠른 시작 매뉴얼 (7 페이지), 빠른 시작 (2 페이지), 빠른 시작 매뉴얼 (8 페이지), 매뉴얼에서 (2 페이지), 매뉴얼에서 (2 페이지)
페이지 인쇄
Configuration Using SIMPL Windows
Using SIMPL Windows, adjust underscan in subslot 02 of the Outputs slot for the
DMPS3-4K-150-C. Set the <Scaler_Underscan_Mode> analog input join to the desired
value.
NOTE:
User-Selectable Output Resolution
The output resolution of the scaler is user selectable. To select the output resolution, use
the web interface or SIMPL Windows as discussed in the following sections.
Configuration Using the Web Interface
An overview of the steps necessary to select the output resolution of the scaler is as follows:
NOTE:
1. On the Main Setup page, click the INTERNAL SCALER Settings button.
2.
3. (Applicable only when EDID Preferred is selected in the Current Scaler Resolution
Configuration Using SIMPL Windows
Using SIMPL Windows, set the output resolution in subslot 02 of the Outputs slot for the
DMPS3-4K-150-C. To do so, set the <Scaler_User_Resolution_Index> analog input join
to the desired value.
NOTE:
Supplemental Guide – DOC. 7724A
For detailed information, refer to the SIMPL Windows help file.
For detailed information, refer to the online help of the web interface.
The Output Configuration page for the internal scaler opens.
In the Current Scaler Resolution list, click the desired setting.
list) In the Preferred EDID list, click the radio button that corresponds to the
preferred EDID setting.
Output Configuration Page for Internal Scaler—Current Scaler Resolution Configuration
For detailed information, refer to the SIMPL Windows help file.
DMPS3-4K-150-C: 3-Series 4K DigitalMedia Presentation System • 7