Shimano 105 FC-R7000 딜러 매뉴얼 - 페이지 18
{카테고리_이름} Shimano 105 FC-R7000에 대한 딜러 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano 105 FC-R7000 21 페이지. Front chainwheel
Shimano 105 FC-R7000에 대해서도 마찬가지입니다: 딜러 매뉴얼 (21 페이지)
![Shimano 105 FC-R7000 딜러 매뉴얼](/uploads/products/server2/5078472/5078472.jpg)
INSTALLATION
Installation of the crank
(C)
(z)
(A)
4
(B)
Push in the stopper plate and check that
the plate pin is securely in place, and
then tighten the bolt of the left crank
arm.
Tighten both bolts equally to the
specified tightening torque (12 - 14 N·m).
(z)
The illustration is of the left crank
arm (cross-section)
18
(A)
Plate pin
(B)
Stopper plate
(C)
Left crank arm
Tightening torque
12 - 14 N·m
NOTE
•
The two bolts should be tightened at the
same time rather than each bolt being fully
tightened separately.
•
Set the stopper plate in the correct
direction as shown in illustration.