Shimano BB-MT501 매뉴얼 - 페이지 17

{카테고리_이름} Shimano BB-MT501에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano BB-MT501 26 페이지.
Shimano BB-MT501에 대해서도 마찬가지입니다: 딜러 매뉴얼 (24 페이지)

INSTALLATION

Installing the crank arms

(z)

(A)

(B)

(C)

Push in the stopper plate and check that

the plate pin is securely in place, and

then tighten the screws of the left crank

arm.

Tighten both screws equally to the

specified tightening torque (12 - 14 N·m).

(z)

The illustration is of the left crank

arm (cross-section)

(A)

Plate pin

(B)

Stopper plate

(C)

Left crank arm

Tightening torque

12 - 14 N·m

NOTICE

•

The two screws should be tightened

alternately in stages rather than each screw

being fully tightened at once.

•

Spacers used vary according to the width of

the bottom bracket shell. For details, refer

to "Spacer installation method".

•

Set the stopper plate in the correct

direction as shown in illustration.