Shimano BL-C6010 딜러 매뉴얼 - 페이지 18
{카테고리_이름} Shimano BL-C6010에 대한 딜러 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano BL-C6010 27 페이지. Hub roller brake
페이지 인쇄
- 1. Table of Contents
- 1. Important Notice
- 2. To Ensure Safety
- 3. Installation
- 3. List of Tools to be Used
- 3. Installation of the Lever
- 3. Installing the INTER M Brake to the Hub Body
- 3. Installation of the Hub to the Frame
- 3. Installation of the Brake Cable
- 4. Adjustment
- 4. Adjusting the Brake Cable
- 5. Maintenance
- 5. Applying Grease
INSTALLATION
Installation of the brake cable
(d)
9
Front side
(A)
1
(B)
2
To be continued on next page
After pressing the lever, check that the
red marks on the inner cable fixing
washer with the inner cable mounting
bolt unit press-fit into the winder unit
are in the right direction as shown in
the illustration.
(d)
(d)
After checking that the cable
(C)
adjustment barrel (B) and adjustment
nut (A) are fully tightened, insert the
outer holder unit (C) into the inner
cable in the direction shown in the
illustration.
After checking that the marking of the
back side of the inner cable fixing bolt
(a)
unit (D) is "F", pass the inner cable
through the hole of the inner cable
fixing bolt unit.
(D)
(a)
Red
Markings "F"
18
When detaching the cable, perform in
reverse order.
(A)
Adjustment nut
(B)
Cable adjustment barrel
(C)
Outer holder unit
(D)
Inner cable fixing bolt unit