Shimano BL-C6010 딜러 매뉴얼 - 페이지 21

{카테고리_이름} Shimano BL-C6010에 대한 딜러 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano BL-C6010 27 페이지. Hub roller brake

INSTALLATION

Installation of the brake cable

(D)

(A)

(a)

(B)

(C)

(b)

(D)

(E)

(c)

Place the cable adjustment barrel (A)

so that it is (a) 13 to 15 mm from the

end of the outer casing holder (B), and

then pass the inner cable through the

cable adjustment barrel and then

through the hole (C) in the inner

mounting bolt.

Check that both ends (b) of the outer

casing are securely inserted into the

cable adjustment barrels (D) of both

the brake lever and brake arm.

Push the link back until it stops. Then,

while pulling the inner cable to apply

the full amount of tension to the

cable, tighten the inner cable fixing

nut (E).

(A)

Cable adjustment barrel

(B)

Outer casing holder

(C)

Hole in the inner cable fixing bolt

(D)

Cable adjustment barrel

(E)

Inner cable fixing nut

Tightening torque

6 - 8 N·m

NOTE

The inner cable has to be set so that it

passes under the link, as shown in the

illustration (c).