Shimano BR-IM35 딜러 매뉴얼 - 페이지 13

{카테고리_이름} Shimano BR-IM35에 대한 딜러 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano BR-IM35 27 페이지. Hub roller brake

페이지 인쇄

INSTALLATION

Installation of the hub to the frame

(H)

(I)

Pull the wheel towards the rear to adjust the chain tension and align the wheel with

the frame center.

Temporarily tighten the hub nut strongly.

Slightly loosen the hub nut.

Fully tighten the brake unit fixing nut.

(L)

To be continued on next page

Attach the brake arm of the INTER M

brake to the chainstay with the brake

arm clip (J).

Then temporarily fix the clip screw (K)

and clip nut (I) by lightly tightening

them.

Check that the brake unit is firmly

secured to the hub body with the

brake unit fixing nut or brake unit

fixing washer (H).

(J)

(K)

Take up the slack in the chain and

secure the wheel to the frame with the

hub nut (L).

(H)

Brake unit fixing nut/Brake unit

fixing washer

(I)

Clip nut

(J)

Brake arm clip

(K)

Clip screw (M6×16 mm)

NOTE

If the hub nuts are cap nuts, use a frame

with dropouts that are at least 7 mm thick.

Tightening torque

20 - 25 N·m

(L)

Hub nut

Tightening torque

30 - 45 N·m

NOTE

Check that the wheel is fixed securely to

the frame with the hub nuts.