Shimano BR-M6000 딜러 매뉴얼 - 페이지 28
{카테고리_이름} Shimano BR-M6000에 대한 딜러 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano BR-M6000 39 페이지. Hydraulic disc brake
Shimano BR-M6000에 대해서도 마찬가지입니다: 딜러 매뉴얼 (39 페이지)
페이지 인쇄
- 1. Table of Contents
- 1. Important Notice
- 2. To Ensure Safety
- 3. List of Tools to be Used
- 4. Installation
- 4. Disc Brake Mount Adapter (for 180Mm Disc Brake Rotors)
- 4. Disc Brake Rotor Adapter
- 4. Brake Hose
- 5. Maintenance
- 5. Adding Shimano Genuine Mineral Oil and Bleeding Air
- 5. Replacing the Brake Hose
- 5. Replacing the Brake Pads
MAINTENANCE
Adding Shimano genuine mineral oil and bleeding air
13
14
15
Plug the oil funnel with the oil stopper
so that the side with the O-ring attached
(A)
is facing downward.
(B)
Remove the oil funnel while it is still
being plugged with the oil stopper, and
then attach the O-ring to the bleed
screw and tighten it until oil flows out to
make sure that there are no air bubbles
remaining inside the reservoir tank.
(A)
Wipe away any oil that has overflowed.
28
(A)
Oil stopper
(B)
O-ring
(A)
O-ring
Tightening torque
0.5 - 1 N·m
NOTE
Do not operate the brake lever. If operated,
there is a risk of air bubbles entering the
cylinder.