Shimano BR-M755 서비스 매뉴얼 - 페이지 28
{카테고리_이름} Shimano BR-M755에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano BR-M755 41 페이지. Disc brake systems
페이지 인쇄
Adding brake fluid and
bleeding air
1.
With the pad spacers still attached to the calipers,
place the bicycle into a bicycle stand or similar as
shown in the illustration so that the reservoir tank
is parallel to the ground.
Tank should
be parallel to
the ground
Reservoir tank
2.
Set a 8mm socket wrench in place, attach a bag to
the tube, and then place the tube onto the bleed
nipple as shown in the illustration.
Bleed nipple
Socket wrench
(8mm)
BL-M755
• Socket wrench
Model Number
BR-M965 / M966
BR-M755
BR-M555 / C901
3.
Loosen the bleed nipple by 1/8th of a turn to open
it, and then pour oil into the reservoir tank. Gently
operate the brake lever while doing this to help
prime the system with the oil.
Hose
Calipers
BL-M756
Tube
Bag
Size
7 mm
8 mm
6 mm
4.
When the oil goes into the hose,
the oil level in the reservoir tank
will drop, so be sure to continue
adding oil to maintain the oil
level so that air is not drawn in
through the port.
Lever operation
27
If oil periodically comes out
from the bleed nipple, tighten
the bleed nipple for a while.
If the brake lever is then
operated, air bubbles in the
system will rise up through the
port into the reservoir tank.
Once the bubbles stop
appearing, depress the brake
lever as far as it will go.
The normal condition is for the
lever to be stiff at this point.
Loose
Slightly stiff
Stiff