Shimano E6000 Series 사용자 설명서 - 페이지 31
{카테고리_이름} Shimano E6000 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano E6000 Series 38 페이지. Total electric power system
Shimano E6000 Series에 대해서도 마찬가지입니다: 사용자 설명서 (47 페이지)
Error messages on the cycle computer
WARNING
This disappears if the error is fixed.
A message appears instead of the clock indication.
List of warnings
Situation where the
Code
error occurred
The temperature of
W010
the drive unit is high.
The traveling speed
W011
cannot be detected.
Two or more assist
switches are
W030
connected to the
system.
A communication
error between the
-
drive unit and the
motor unit was
detected.
Condition for removing
the operational
restriction when a
warning is being
displayed
The level of assistance
may decrease.
The maximum speed up
to which power
assistance is provided
may decrease. (Power
assistance is provided
up to 25 km/h in top
gear.)
Gear shifting is not
available for power
gear shifting
derailleurs.
Gear shifting is not
available for power
gear shifting
derailleurs.
29
Remedy
Stop using the assist function until the temperature of
the drive unit drops.
If the situation does not improve, contact the place of
purchase.
Check that the speed sensor is properly installed.
If the situation does not improve, contact the place of
purchase.
Change the assist switch to the gear shifting switch, or
connect only one assist switch and turn on the power
again.
If the situation does not improve, contact the place of
purchase.
Check that the cable is properly connected between the
drive unit and the motor unit.
If the situation does not improve, contact the place of
purchase.