Shimano EW-WU101 사용자 설명서

{카테고리_이름} Shimano EW-WU101에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano EW-WU101 1 페이지. Wireless unit
Shimano EW-WU101에 대해서도 마찬가지입니다: 사용자 설명서 (1 페이지), 사용자 설명서 (2 페이지)

페이지 인쇄

UM-72R0A-001-00

Wireless Unit

(EW-WU101)

User's manuals in other languages are available at :

http://si.shimano.com

IMPORTANT NOTICE

• Contact the place of purchase or a bicycle dealer for information on installation and adjustment

of the products which are not found in the user's manual. A dealer's manual for professional

and experienced bicycle mechanics is available on our website (http://si.shimano.com).

• Do not disassemble or alter this product.

For safety, be sure to read this user's manual thoroughly

before use, and follow them for correct use.

Important Safety Information

Guidelines that require replacement, contact the place of purchase or a bicycle dealer.

WARNING

• When the shifting switch is operated, the motor which drives the rear derailleur

will operate to the shifting position without stopping, so be careful not to get

your ﬁ ngers caught.

• After reading the user's manual carefully, keep it in a safe place for later reference.

Note

• This is a small waterproof connector. Do not repeat connecting and

disconnecting it. It may impair the function.

• The components are designed to be fully waterproofed to withstand wet

weather riding conditions; however, do not deliberately place them into water.

• Do not clean the bicycle in a high-pressure car wash. If water gets into any of

the components, operating problems or rusting may result.

• Handle the products carefully, and avoid subjecting them to any strong shocks.

• Contact the place of purchase for updates of the product software. The most

up-to-date information is available on the Shimano website.

• Do not use thinners or similar substances to clean the products. Such substances

may damage the surfaces.

• Be careful not to let water get into the terminal.

• Store in a safe place out of the reach of small children to avoid letting them

swallow by mistake.

• 2.4GHz digital wireless system

2.4GHz-frequency digital wireless technology, which is the same technology

used for wireless LAN.

However, in a very rare occasions, objects and places may generate strong

electromagnetic, waves and interference, which may result in incorrect measurement.

Television, PC, radios, motors/engines, or in car and trains.

Railroad crossings and near railway tracks, around television transmitting

stations and radar bases.

Other wireless computers or digitally controlled light.

• Products are not guaranteed against natural wear and deterioration from

normal use and aging.

• For maximum performance we highly recommend Shimano lubricants and

maintenance products.

User's manual

Regular inspections before riding the bicycle

Before riding the bicycle, check the following items. If any problems are found

with the following items, contact the place of purchase or a bicycle dealer.

• Is the wireless unit securely installed to the frame?

• Is there sufﬁ cient charge remaining in the battery?

• Is there any noticeable damage to the electric wires?

• Is the mounting band cracked or damaged?

Names of parts

Functions

ANT+ connection

The wireless unit transmits the following three types of information to compatible

cycle computers or receivers.

1) Number of gears (front, rear)

2) Di2 battery level (External type: BM-DN100, Built-in type: BT-DN101)

3) Adjustment mode information

For information on which of the above types of information is to be displayed,

refer to the manual for your cycle computer or receiver.

* The latest functions can be checked by updating the software via E-tube Project.

For details, consult the place of purchase.

Junction [A]

Battery (SM-BTR1)

Junction [B]

Wireless unit

(EW-WU101)

Electric wire

Bluetooth connection

E-TUBE PROJECT for smartphones/tablets may be used if a Bluetooth connection is

established with a smartphone/tablet. (The Error check function cannot be used.)

How to conduct pairing

ANT+ connection

To conduct pairing, the cycle computer needs to be in pairing mode. For

information on how to put the cycle computer into pairing mode, refer to the

manual for the cycle computer.

1) Put the cycle computer into pairing mode.

2) When using an external battery

Check that the electric wires are connected to the wireless unit. Then, remove

and remount the external battery.

When using a built-in battery

Check that the electric wires are connected to the wireless unit. Then, remove

the electric wires (two wires) from the wireless unit and reconnect them.

( Pairing communication begins about 30 seconds after the battery is

remounted or the electric wires are reconnected to the wireless unit.)

3) This completes the pairing process.

Check on the cycle computer to see if pairing has succeeded.

If pairing cannot be performed in the way described above, refer to the manual

for your cycle computer.

For information on how to show the number of gears or the Di2 battery level,

refer to the manual for the cycle computer.

Bluetooth connection

Before setting up a connection, turn on Bluetooth on the smartphone/tablet.

1) Press the button on junction A or the adjustment button on the cycle

computer. (for about 0.5 seconds)

2) Activate E-TUBE PROJECT for smartphones/tablets while pairing mode is active

(continues for about 15 seconds) and then select the displayed wireless unit.

(The wireless unit will display as "E-Tube" by default.)

* To disconnect, turn off Bluetooth on the smartphone/tablet.

One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003

Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222

3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan

Please note: speciﬁ cations are subject to change for improvement without notice. (English)