Shimano ALFINE SG-S7001-8 딜러 매뉴얼 - 페이지 7
{카테고리_이름} Shimano ALFINE SG-S7001-8에 대한 딜러 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano ALFINE SG-S7001-8 48 페이지.
TO ENSURE SAFETY
Clean the chain with an appropriate chain cleaner regularly. Intervals between maintenance depend on the
use and riding circumstances.
Use the reinforced connecting pin only for connecting the narrow-type chain. If connecting pins other than
reinforced connecting pins are used, or if a reinforced connecting pin or tool which is not suitable for that
type of chain is used, sufficient connection force may not be obtained, which could cause the chain to break
or skip.
If it is necessary to readjust the length of the chain due to a change in the number of sprocket teeth, make the
cut at some other place than the place where the chain has been joined using a reinforced connecting pin or
an end pin.
The chain will be damaged if it is cut at a place where it has been joined with a reinforced connecting pin or
an end pin.
End pin
Link pin
Reinforced connecting pin
Check that the tension of the chain is correct and that the chain is not damaged. If the tension is too weak or
the chain is damaged, the chain should be replaced. If this is not done, the chain may break and cause serious
injury.
7