Shimano EP600 사용자 설명서 - 페이지 15
{카테고리_이름} Shimano EP600에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano EP600 30 페이지.
SHIMANO STEPS characteristics
When the battery level is low, the level of assistance is automatically reduced to increase the maximum
traveling distance.
When battery levels are unstable, or when assist power is not required, you can turn assist mode to
[OFF].
[Fine tune]
The riding comfort of the assist bicycle is determined by the relationship between the force applied to the pedals
and the drive unit output, and the maximum output of the drive unit. [Fine tune] supports a wide range of
riding conditions with up to 15 levels of settings.
The number of settings registered by default depends on the bicycle.
The settings and gear position can be customized in E-TUBE PROJECT.
Example of five-level [Fine tune] configuration
Drive unit output
Cycle computer display
5/5
4/5
3/5
2/5
1/5
Force applied to pedals
The drive unit's maximum output may be capped by the bicycle manufacturer depending on national
and regional laws and regulations.
Automatic gear shifting
This product provides automatic gear shifting not only with conventional internal geared hubs, but also for
bicycles with rear derailleurs.
In addition, you can expand the automatic gear shifting settings to configure the following detailed settings in
E-TUBE PROJECT. You can register up to two combinations of these settings, and use the shift switch to change
Highest assist level
Intermediate assist level
Lowest assist level
15