Shimano SG-C6001-8 딜러 매뉴얼 - 페이지 21

{카테고리_이름} Shimano SG-C6001-8에 대한 딜러 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano SG-C6001-8 48 페이지.

Installation/removal

Installing the disc brake rotor

5 screw type (with lock washers)

Temporarily secure the disc brake rotor and the disc brake rotor lock washers to the hub as shown in the

figure.

Fit the lock washers so that the marking "TOP" is visible.

Ensure that the hooked part of the lock washer is securely caught on the notch in the disc brake

rotor, then tighten on the lock washer with the disc brake rotor mounting screw. If tightened while

the hooked parts are against the surface of the disc brake rotor, the lock washers and its hooked

parts will become deformed.

Hooked part of lock washer

Notch in disc brake rotor

The lock washers are not reusable. Always use new lock washers when installing the disc brake

rotor.

Use the dedicated disc brake rotor mounting screws.

Lock washer

2 - 4 N·m

Disc brake rotor mounting

screw