Shimano SG-C6001-8 딜러 매뉴얼 - 페이지 24

{카테고리_이름} Shimano SG-C6001-8에 대한 딜러 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano SG-C6001-8 48 페이지.

Installation/removal

Installation of the hub to the frame

Place non-turn washers onto the right and left of the hub axle.

Turn the cassette joint so that the protrusions of the non-turn washers fit into the grooves in the rear

dropouts and align the joint to be installed almost parallel to the chainstay.

Non-turn washer (for left-side use)

Cassette joint

Chainstay

When installing parts such as a mudguard stay to the hub axle, install them in the order shown in

the figure.

Non-turn washer

When installing the hub to the frame, the chain guard may come off. Make sure that the chain

guard is securely installed. If not properly installed, noise may be generated.

Chain guard

Rear dropout groove

Non-turn washer

(for right-side use)

Mudguard stay

Carrier stay

Washer

Cap nut