Shimano STEPS E6000 사용자 설명서 - 페이지 14

{카테고리_이름} Shimano STEPS E6000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano STEPS E6000 46 페이지. Shimano steps e6000 battery and charger

Before your first ride

Make sure that your pedelec is adjusted to your height and ready to use.

Familiarise yourself with the basic functions of your pedelec.

DANGER

Ask your cycle dealer to show you how to use, and explain, the special

features of the pedelec and its components. Please also follow the

component guides. We recommend having your cycle dealer perform

all assembly and adjustment work. Otherwise, components could

become loose due to a faulty assembly. If this happens whilst you are

cycling, you could injure yourself very seriously or even die. If you do

have to tighten something yourself, a full list of torque settings is in

Section

 8. Torque settings Page EN-46

requirement).

Adjust the pedelec to your height. If the bike is not correctly adjusted

to your height, you can lose control of the bike and fall badly.

Practise braking and riding with the assist function in a safe place

before venturing into traffic. If you do not familiarise yourself with the

operation and higher speed of your pedelec, you could cause a serious

accident. Ride in ECO mode until you feel confident enough to try the

higher modes. Dismount if you ever feel unsafe.

EN-14

Original User Guide | Pedelec Shimano Steps E6000 Version 1

(strict adherence to which is a

3.1

Attaching the pedals

1. Screw the right-hand pedal (marked 'R') into the right-hand pedal

crank in a clockwise direction.

2. Screw the left-hand pedal (marked 'L') anticlockwise into the left-hand

pedal crank.

DANGER

Screw the pedals in straight, otherwise you could damage the thread

on the pedal crank; if this happens when you are cycling, a severe fall

could result.

3. Tighten both pedals towards the front wheel to a torque of 40 Nm.