Shimano STEPS E6000 사용자 설명서 - 페이지 19
{카테고리_이름} Shimano STEPS E6000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano STEPS E6000 46 페이지. Shimano steps e6000 battery and charger
페이지 인쇄
3.4
Adjusting the sprung seatpost
DANGER
It is best to ask your cycle dealer to adjust the suspension elements of
the seatpost.
1. Remove the seatpost.
2. Tighten the suspension adjustment screw with an Allen key (6 mm
AF) in the clockwise direction to reduce the suspension or loosen
anticlockwise to increase the suspension.
DANGER
The suspension adjustment screw must not
protrude from the seatpost, otherwise the
screw/seatpost can loosen – if this happens
while riding you could fall off, resulting in
serious injuries.
*dependent on model
3.5
3.6
A slider control is located on the rear of the front light. Depending on
which way you move it, the front and rear light will be on or off when you
are riding.
Suspension
adjustment
3.7
screw
Make sure that you can always reach the brakes comfortably and that you
are familiar with their operation and position. Note which brake lever
operates the front and rear brakes. If your pedelec is fitted with a back
Screw must not protrude
from the seatpost
pedal or coaster brake, you can operate it by pedalling backwards.
Adjusting the height and angle of the handlebars
DANGER
Ask your cycle dealer to perform these adjustments. You can otherwise
run the risk of loosening the handlebars which could lead to a fall
causing severe injuries.
Switching the lights on and off
Braking
Original User Guide | Pedelec Shimano Steps E6000 Version 1
*
EN-19