Shimano STEPS E6000 사용자 설명서 - 페이지 26

{카테고리_이름} Shimano STEPS E6000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano STEPS E6000 46 페이지. Shimano steps e6000 battery and charger

Quick-release skewer is too easy to

Quick-release skewer is not easy to

WARNING

Reattach any previously disconnected cables (e.g. lighting cables),

otherwise you could tear them.

EN-26

Original User Guide | Pedelec Shimano Steps E6000 Version 1

1. Open the quick-release skewer.

2. Hook the quick-release skewer into the

slot and turn it clockwise. This will screw

the axle in the thread. Make sure that

your wheel is correctly centred.

3. Close the quick-release skewer.

4. Repeat if necessary.

1. Open the quick-release skewer.

2. Hook the quick-release skewer into the

slot and turn it anticlockwise until the

quick-release axle protrudes from the axle

hole about 1 cm.

3. Close the quick-release skewer.

4. Repeat if necessary.

3.10.4 Rims

Wear

WARNING

Look out for deep grooves on both rims.

The rims could fracture and cause a fall.

Replace rims as soon as you detect signs

of wear.

Many rims have a wear indicator. If it can

no longer be felt at a certain point, the

rim is worn.

Cleaning

1. Remove the pedelec battery.

2. Brush the rims with a hand brush. Heavier soiling can be removed with

a soft, damp cloth.

IMPORTANT

When you are cleaning the rims, make sure that no water gets into the

motor. Water ingress can damage the motor.

3. Leave to dry.

Wear indicator