Shimano PD-GR400 딜러 매뉴얼 - 페이지 12

{카테고리_이름} Shimano PD-GR400에 대한 딜러 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano PD-GR400 17 페이지.

Maintenance

Adjusting axle bearings

(2) Set the end of the attachment so that it engages the far end of the interior of the

inner bush.

(3) Turn the handle to expand the end of the bearing puller.

(4) Pull out the bearing puller and inner bush.

Take out the outer bush.

Push it out from the crank axle side with a pin or similar tool [#8].

Remove old grease and apply an appropriate amount of new grease to

the inner bush and outer bush.

TECH TIPS

• Apply grease to the extent that it does not flow out when the axle is set into the

pedal (approximately 0.6 g for the inner bush and 0.4 g for the outer bush).

Attachment

Inner bush

Outer bush