Shimano Ultegra SM-BCR2 도움말 매뉴얼 - 페이지 32

{카테고리_이름} Shimano Ultegra SM-BCR2에 대한 도움말 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano Ultegra SM-BCR2 34 페이지. E-tube project
Shimano Ultegra SM-BCR2에 대해서도 마찬가지입니다: 도움말 매뉴얼 (32 페이지)

페이지 인쇄
Shimano Ultegra SM-BCR2 도움말 매뉴얼
 Setting multiple bicycles
After writing is complete with one bicycle, connect another bicycle and click [Continuous settings].
If you are using an old version of the E-TUBE PROJECT application, you cannot read or write
*
settings. Update E-TUBE PROJECT before reading or writing.
Settings files created in the E-TUBE PROJECT below version 3.4.0 cannot be read in in version
*
3.4.0.
If you have not updated the firmware for a certain period of time, it is possible that you will not
*
be able to read or write settings. In that case, update the firmware and try again.
If identical units are connected, you cannot read or write settings.
*
Modifying the setting file or the file's extension name may make it impossible to perform setting.
*
You can enter up to 256 characters in the [Comment] field. You can enter a description of the
*
settings for future reference.
Clicking some of the items such as the switch setting displays an image that shows the setting
*
point for the item.
EACH FUNCTION OF E-TUBE PROJECT
32 / 34