Digital Audio Labs livemix LM-DANTE-EXP2 사용자 설명서 - 페이지 5

{카테고리_이름} Digital Audio Labs livemix LM-DANTE-EXP2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Audio Labs livemix LM-DANTE-EXP2 14 페이지. Dante option card for mix-16/mix-32

페이지 인쇄

INTRODUCTION

The Livemix LM-DANTE-EXP2 is an add-on option card for the

MIX-16/MIX-32 that allows the Livemix personal monitor system

to connect to a Dante network. The system can receive up to 24

channels from the Dante network. Any published channel can be

assigned to any of the 24 available channels in the Livemix personal

monitor system.

Audinate's Dante network protocol delivers a no hassle, self

configuring, true plug-and-play digital audio network that uses

standard Internet Protocols over 100Mb and/or Gigabit Ethernet.

Patent-pending Dante technology distributes digital audio plus

integrated control data with sub millisecond latency, sample-

accurate playback synchronization, extreme reliability and high

channel counts.

ANATOMY OF THE DANTE OPTION CARD

PRIMARY

SECONDARY

LINK/ACT

Dante™ is a trademark of Audinate Pty Ltd.

LIVEMIX DANTE OPTION CARD (LM-DANTE-EXP2)

PRIMARY

SECONDARY

LINK/ACT

12 13

DANTE INPUT CARD V2

LM-DANTE-EXP2

LM-DANTE-EXP

Dante™ is a trademark of Audinate Pty Ltd.

1 PRIMARY PORT

LIVEMIX

DATA OUT

DATA IN

STEREO MIXES 1-16

Connect a CAT5e or CAT6 network cable to the Primary

port on another Dante equipped device to link the

devices directly. Connect a CAT5e or CAT6 network

cable to a Gigabit switch to connect multiple Dante

enabled devices. Use the Primary port for the main

Dante network or when using a single non-redundant

network.

2 SECONDARY PORT

When configuring a redundant network, use the

secondary port for the second "back-up" network when

using Redundant Mode. The Primary and Secondary

ports become a two port switch for connecting up to 2

devices when the card is in Switched Mode.

Two indicator lights on each port report device status

information.

green

• The

light indicates data is being transferred.

yellow

• The

light will illuminate to indicate a 1 Gbps

Ethernet connection. It will be off to indicate a 100

Mbps or lower connection.

NOTE:

It is important to

understand how your

Dante devices publish

audio streams to the

network. Many digital

consoles have multiple

output options and many

of them can be published

to the Dante network.

Consult the manual for

your particular Dante

device to ensure you have

published channels to the

network.

MIX-32

24VDC

3.75A