Digital Barriers EDGEVIS IP Series 하드웨어 설치 매뉴얼 - 페이지 6

{카테고리_이름} Digital Barriers EDGEVIS IP Series에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Barriers EDGEVIS IP Series 13 페이지.

EDGEVIS HD-IP200 HARDWARE INSTALLATION

Updating the software on the unit

Once notified of a new software release by Digital Barriers, updates are available for download from the EdgeVis

support site (see below for link) for installation onto the device.

There are three ways to update the firmware:

•

To update remotely, upload the new firmware to the Firmware tab within the EdgeVis Server web interface

and then, from the Encoder tab, select Upgrade Firmware from the Select Action menu on the desired

encoder.

•

Using the Upgrade Firmware option when logged into the encoder's local web interface.

•

Copy the firmware onto a USB flash drive and insert into a USB port on the front of the unit. The flash drive

can be inserted into a running unit or before the unit is powered up. The update procedure will commence

silently when the USB pen is detected, wait 30s to allow the encoder to find and install the firmware update.

After the firmware is installed it is safe to remove the pen and the unit will automatically reboot.

To access or register for the Digital Barriers Support Site, visit

ISSUED: 17 MARCH 2022

tvi-support.digitalbarriers.com

PAGE 6