Accutone MultiPoint BT703 사용자 설명서 - 페이지 3

{카테고리_이름} Accutone MultiPoint BT703에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Accutone MultiPoint BT703 5 페이지. Multipoint bluetooth headset

페이지 인쇄

Preparations

Charging the Headset

to computer USB port

You need to charge your BT703 before using. There are two ways to charge

your headset, (1) via USB cable and (2) via AC/DC Power Adaptor. The USB

cable is included and the Power Adaptor is optional.

Charging Via USB Cable

Connect your headset as illustrated above, with the small round plug

going into the headset, and the USB plug going into any USB port of your

desktop or notebook computer. .

Charging Via AC/DC Power Adaptor

Similarly, connect your BT703 headset to the small round plug of the

adaptor and the other end to any wall-jack. Depending on your region, the

Voltage and the adaptor pins will be different.

The LED indicator will light up RED during charging, and BLUE when it's

fully charged. It generally takes up to 2 hours for a full charger, but user

should charge the headset for 4 hours during the first charge.

Do not attempt to charge the headset with any adaptor other than the

one provided, as unauthorized adaptors can severly damage the

headset.

RED LED during

Charging

Answer Button

Low Battery Indication

If the headset continuously flashes RED when it's turned on, the headset

is low on battery, please charge the headset as soon as possible.

Answer Button

Confirm pairing, and you phone will ask you for a PASSKEY, enter the

default PIN code of "

Turning the Headset On/Off

Turn ON the headset by pressing and

holding the Answer Button for 4 seconds.

LED Indicator will flash BLUE rapidly 3

times. This indicate the headset is now on.

Turn OFF the headset by pressing and

holding the Answer Button for 3 seconds.

LED Indicator will flash RED rapidly 5

times. This indicate the headset is now off.

Pairing the Headset

With the headset turned OFF, press and

hold the Answer Button until the LED

Indicator alternately flashes BLUE & RED.

Set your Bluetooth-enable mobile phone

to Discovery Mode. Wait for the phone to

search for "BT703" headset.

0000"

(4 zeros) and confirm OK.

Operations