Crestron CP4N 빠른 시작 - 페이지 3

{카테고리_이름} Crestron CP4N에 대한 빠른 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Crestron CP4N 5 페이지.
Crestron CP4N에 대해서도 마찬가지입니다: 빠른 시작 (5 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

CP4 and CP4N

4-Series™ Control System

Connect the Control Subnet

(CP4N Only)

The CP4N has a dedicated Control Subnet that is used for

communication between the control system and Crestron Ethernet

devices without interference from other traffic on the network.

CAUTION: Do not connect the CONTROL SUBNET port to the LAN.

The CONTROL SUBNET port must only be connected to Crestron

Ethernet devices.

For more information on using the Control Subnet, refer to the

4-Series™ Control System Reference

Configure the Control System

The control system may be configured using the provided web

configuration interface. The interface can be accessed using the control

system IP address or the XiO Cloud® service.

Configuration via IP Address

To access the web configuration interface using the control system

IP address:

NOTE: The control system ships with DHCP enabled. A DHCP server is

required to access the web configuration interface via the control

system IP address.

1. Connect the control system to the network.

2. Use the Device Discovery tool in Crestron Toolbox™ software to

discover the control system and its IP address on the network.

3. Enter the control system IP address into a web browser.

Guide.

Configuration via XiO Cloud

The

XiO Cloud® service

allows supported devices across an enterprise to

be managed and configured from one central and secure location in the

cloud. Supported Crestron® devices are configured to connect to the

service out of the box.

Use of the service requires a registered XiO Cloud account. To register

for an XiO Cloud account, refer to

www.crestron.com/Support/Tools/Licensing-Registration/XiO-Cloud-

Registration-Room-Licenses.

NOTE: The device may be disconnected from the XiO Cloud service by

navigating to the Cloud Services tab in Crestron Toolbox™ software

(Functions > Device Info > Cloud Services). For details, refer to the

Crestron Toolbox help file.

To connect the device to the XiO Cloud service:

1. Record the MAC address and serial number that are labeled on the

shipping box or the device. The MAC address and serial number are

required to add the device to the XiO Cloud service.

NOTE: If the device has multiple MAC addresses, use the MAC

address that is providing the primary connection back to the

network. For most devices, the Ethernet MAC address should be

used. However, if your device is connecting to the network over a

different protocol (such as Wi-Fi® communications), use the

MAC address for that protocol instead.

2. Log in to your XiO Cloud account at portal.crestron.io.

3. Claim the device to the XiO Cloud service as described in the

XiO Cloud User Guide.

Select the device from the cloud interface to view its status and

settings. The device may now also be managed and assigned to a group

or room. For more information, refer to the XiO Cloud User Guide.

Quick Start