Crestron DM-RMC-4KZ-100-C 빠른 시작 - 페이지 2

{카테고리_이름} Crestron DM-RMC-4KZ-100-C에 대한 빠른 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Crestron DM-RMC-4KZ-100-C 5 페이지. Digitalmedia 8g+® 4k604:4:4 hdr receiver and room controller

페이지 인쇄
Crestron DM-RMC-4KZ-100-C 빠른 시작
DM-RMC-4KZ-100-C
DigitalMedia 8G+® 4K60 4:4:4 HDR Receiver and Room Controller
Mounting onto a Rack Rail
The device can be mounted onto a front or rear rack rail. To mount the
device:
1. Position either of the mounting flanges so that the holes align with the
holes in the rack rail.
2. Secure the device to the rack rail using two rack mount screws
(not included).
Rack Rail Mounting Example

Connect the Device

Connect the device as required for the application.
NOTES:
The LAN port can be connected to an Ethernet switch only when
l
the DM IN port does not connect to a DigitalMedia switcher.
The DM IN port is a PoDM powered device (PD) port and is also
l
compatible with HDBaseT PoE:
In order for the DM IN port to receive PoDM, the port must be
o
connected to a DigitalMedia switcher or other DigitalMedia
equipment that has a PoDM power sourcing equipment (PSE)
port.
In order for the DM IN port to receive HDBaseT PoE, the port
o
must be connected to equipment that has a corresponding
HDBaseT PoE PSE port.
Wiring that connects to a PoDM or HDBaseT PoE port is designed
for intrabuilding use only.
PoDM, HDBaseT PoE, or the optional
(sold separately) can be used to power the DM-RMC-4KZ-100-C.
Quick Start
PW-2407WU
power pack
2