Accutone USB400 VoIP COMMUNICATION HEADSET 설치 매뉴얼 및 사용자 설명서 - 페이지 8

{카테고리_이름} Accutone USB400 VoIP COMMUNICATION HEADSET에 대한 설치 매뉴얼 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Accutone USB400 VoIP COMMUNICATION HEADSET 12 페이지. Voip communication headset
Accutone USB400 VoIP COMMUNICATION HEADSET에 대해서도 마찬가지입니다: 설치 매뉴얼 및 사용자 설명서 (8 페이지)

페이지 인쇄

Operating your headset.

Operation.

C2. operating the Sound Configuration Software

The USB400 headset is equipped with a Sound Configuation software for sound

adjustments. You can open the program by simply double clicking on the orange

Accutone icon in the icon tray, as shown in section B4 of this manual.

When selected Xear 3D as your

DSP mode, you can experience the

7.1 3D-surround effect even with

your headset. Choose headset as

your Output Device, turn on Xear

3D, and click the rotating icon

under the 7.1 Virtual Speaker

Shifter during your favorite audio

applications.

operating digital audio controller

operating the sound configuration software

operating the AccuSound software

In Main Setting tab, you can choose

your output device from headset to

desktop speakers.

USB400 is also equipped to be used

for digital entertainment

applications like surround sound

movie viewing and gaming.

When connected to a desktop

speaker, USB400 can simulate 7.1

surround sound using Xear 3D

technology.

Simply select your application here.

You can also choose to use S/PDIF output

when connected to other digital audio devices.

USB400 - Installation Guide & User Manual

C2. operating the Sound Configuration Software

In Mixer tab, the top panel is the

Playback Volume Control, and the

bottom panel is the Recording

Volume Control.

In Playback Volume Control, you

can adjust the main volume and

balance by adjusting the knob.

Other volume controls includes

Wave, SW Synth., CD Player and

Microphone realtime playback.

Microphone realtime playback adjusts the feedback volume of the microphone to

yourself. The small hammer icon next to the microphone volume control opens up the

microphone advanced adjustments. You can choose to turn on the microphone

playback mute or microphone boost function.

Please note that in muting function inside the Playback Volume Control -

advanced microphone adjustments ONLY mute the volume of the microphone

going to the speaker of the headset, the user on the other end can still hear you.

In Recording Volume Control, you can choose the Stereo Mix volume

control and the Microphone transmit/record volume control. In this

microphone control, you are adjusting the actual outgoing volume. Again,

the hammer icon opens up the advanced setting which include mute and

microphone boost.

USB400 - Installation Guide & User Manual

[ inspiring people, inspiring change ]

Operation.