Actron OMEGA Series 조립 지침 - 페이지 4
{카테고리_이름} Actron OMEGA Series에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Actron OMEGA Series 5 페이지. Latch assy - double paddle, double bolt
페이지 인쇄CORONA, CALIFORNIA
PLACE BOLTS INTO CASE AS SHOWN.
INSERT PIN THRU HOLE IN CASE AND HOLE
IN SMOOTH CAM. REPEAT FOR SECOND BOLT.
STAKE BOTH ENDS OF EACH PIN TO PREVENT
14
PLACE COMPRESSION SPRINGS IN BOLT SLOTS AS SHOWN.
CAREFULLY PLACE HANDLE-GUIDE ASSEMBLY INTO CASE IN
"SWEEPING" MOTION. COMPRESS THE SPRINGS IN THE BACK OF
THE GUIDE BOLT AND THEN BRING THE HANDLE-GUIDE ASSEMBLY
FORWARD MAKING SURE THE ACTUATOR HANDLES SLIDE OVER
THE ROLLERS ON THE BOLT ASSEMBLY.
NOTE: APPLY GREASE TO COMPRESSION SPRINGS IF NEEDED.
OMEGA SERIES
ASSEMBLY
INSTRUCTIONS
STEP 6
PINS FROM FALLING OUT.
STEP 7
15
REV
A23909
NC 9/21/12
1
DATE
SHEET 4 OF 5