Digital Check SB 600 쉬운 설치 매뉴얼

{카테고리_이름} Digital Check SB 600에 대한 쉬운 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Check SB 600 1 페이지. Sb series
Digital Check SB 600에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

페이지 인쇄

Step #1: Check Scanner Components

SB Scanner scanner (either SB500, 600 or

1000).

USB 2.0 Cable.

Travel Pouch (SB500/SB600 only).

Scanner Stand (SB600 only).

Calibration Card.

SB1000

SB500

SB600

Step #2: Install Scanner Drivers

Install the scanner drivers per your

application instructions or if directed to

do so, from the enclosed CD.

connect the scanner to the PC before

loading the drivers.

SCANNERS

Optional Drivers, User Manual, Product Literature

Digital Check Corporation

North eld, IL 60093

847-446-2285

Once the drivers have been loaded onto

your laptop or PC, plug in the USB cable

to the scanner and to the PC and launch

your scanning application.

cable for the SB1000 is located in back of

the scanner.

USB Port

SB500 &

SB600

Power port

(optional power

supply sold separately)

SB1000

Step #3: Calibrate the Scanner

SB scanners must be calibrated to each

laptop or PC on which it is operated at the

initial istallation of the device. Follow the

Note: Do not

screen prompts after the application is

launched. To calibrate the scanner, place

the calibration card into the scanner with

the arrows on top and pointed in toward

the scanner as shown.

Note: the USB

You are now ready to scan. Follow the

application instructions as to which

direction and orientation to feed the check

or document.