Digital Data Communications Level One GTL-2091 매뉴얼 - 페이지 5

{카테고리_이름} Digital Data Communications Level One GTL-2091에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Data Communications Level One GTL-2091 9 페이지. Stp optional characteristic configuration commands
Digital Data Communications Level One GTL-2091에 대해서도 마찬가지입니다: 매뉴얼 (14 페이지), 매뉴얼 (6 페이지), 매뉴얼 (5 페이지), 매뉴얼 (18 페이지)

페이지 인쇄

Command mode

Interface configuration

Example

This example shows how to enable BPDU guard on this interface:

Console_config_f0/0# spanning-tree bpduguard enable

Console_config_f0/0#

1.1.3

spanning-tree bpdufilter

Description

To enable bridge protocol data unit (BPDU) filtering on the interface, use the

spanning-tree bpdufilter command in interface configuration mode. To return to the

default settings, use the negative form of this command.

spanning-tree bpdufilter {disable | enable}

no spanning-tree bpdufilter

Parameter

None

Default

Disabled

Instruction

In SSTP/PVST mode, if a port that configured BPDU Filter and Port Fast receives

BPDU, the BPDU Filter and Port Fast characteristics on that port will be disabled

automatically to restore the port to an ordinary port. Then this port must endure the

wait from Listening to Learning before entering Forwarding state.

This feature is invalid in RSTP/MSTP mode.

Command mode

Interface configuration

Example

This example shows how to enable BPDU filtering on this interface:

Console_config_f0/0# spanning-tree bpdufilter enable

http://www.level1.com

STP Optional Characteristic Configuration Commands

- 3 -