Digital Devices Octopus Net 매뉴얼 - 페이지 8

{카테고리_이름} Digital Devices Octopus Net에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Devices Octopus Net 8 페이지.

7. Specials

Internal power supply

When using the internal power supply, connector (4) is used by an ATX power supply unit.

However, the ATX power supply unit will not start until it receives a request to do so. To do this, a

circuit must be closed, either by a cable bridge, whereby pin 14 (20-pin plug) or pin 16 (24-pin plug)

must be closed to earth in order to close the circuit. Attention: Colours may vary if the standard is

not adhered to. Alternatively, an ATX test cable can be used.

Octopus NET mini ITX cannot control the ATX power supply unit. The power supply unit must run and

supply power, the connection for the power button is only used to switch the Octopus Net mini ITX

on and off.

The pin strip (3) has the following configuration and can be used as a supplement if required.

Attention: An ATX power supply unit should not be operated for a longer period of time without a

consumer.

Warning: Any modification to the hardware must be carried out by trained specialists.

Addition to the Octopus Net manual - Octopus NET Mini ITX

1. PWR LED

2. PWR LED

3. PWR Switch

4. PWR Switch

5. Molex P4 connector

+3V

GND

Wake Up

GND

24. Mai 2017