Digital Electronics PS-2000B Series 설치 매뉴얼 - 페이지 15

{카테고리_이름} Digital Electronics PS-2000B Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Electronics PS-2000B Series 16 페이지. Windows xp multi language preinstalled hard disk unit

페이지 인쇄

9. After the recovery operation finishes, Symantec Ghost

following message will appear.

After the message appears, turn off the power supply of the unit.

"Please turn off the computer."

10. After turning on the power supply once again, push the [F2] key to go to

the BIOS Setup Screen.

11. In the Setup screen, set Load Optimized Defaults to reset all BIOS set-

tings to their original values at the time of delivery. When using FD, set

[1.44M, 3.5 in] for [Drive A] of [Standard CMOS Features]. Press the

[F10] key to save the settings and restart the unit.

12. After the unit restarts, set up your OS.

4 OS Setup

• If the hard disk unit breaks down due to a hardware prob-

lem, (Ex. if BIOS cannot find the hard disk, if the hard disk's

lifetime expires, or it breaks down), Symantec Ghost

not recover the hard disk. Pro-face recommends that in this

case you contact your local PS-B distributor for instruc-

tions about hard disk recovery or replacement.

• Pro-face does not guarantee the preservation of any data

stored on the HDD unit if the HDD unit has an accident,

malfunctions or is damaged in any way. Therefore, the

regular backing up of important HDD unit data to either

floppy disks, or other type of suitable magnetic media is

strongly recommended.

-15-

finishes and the

can-