Digital Electronics Corporation APL3600-TA 설치 매뉴얼 - 페이지 9
{카테고리_이름} Digital Electronics Corporation APL3600-TA에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Electronics Corporation APL3600-TA 19 페이지.
페이지 인쇄2.
Internal switches of the front module
Rear face of the front module
Switch
Switch Name
Location
Touch Panel
SW1
Set SW
SW2
—
Touch Panel Set SW
Switch
Description
No.
1 to 2
Internal setting
3
Cancellation function
4
of two point touch on
the touch panel
*1
When two points are pushed, it is considered that middle point between the two points is touched
according to the nature of the analog resistive touch panel. When the switch, etc. is set on the middle
point, it will be enabled and may operate. To prevent such a switch from malfunction in case of pushing
two points, turn ON the SW No.4 in advance, then the middle point will be disabled for two point touch.
Factory
Settings
1:ON, 2:ON,
4-point dipswitch. For Touch Panel Set SW
3:OFF, 4:OFF
details, see " Touch Panel Set SW".
1:ON, 2:ON,
Internal setting.
3:ON, 4:OFF
Do not change. (Factory setting)
ON
OFF
Reserved Reserved
Enabled Disabled OFF
*1
ON
SW2
SW1
Description
Factory
Settings
ON
Do not change. (Factory setting)
OFF
The middle point is not considered to be
touched when the SW is ON. It is considered
to be touched when the SW is OFF.
9
ON
Notes