Digital Electronics Corporation PS-2000B Series 설치 매뉴얼 - 페이지 13

{카테고리_이름} Digital Electronics Corporation PS-2000B Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Electronics Corporation PS-2000B Series 17 페이지. Windows 2000 multi language preinstalled hard disk unit
Digital Electronics Corporation PS-2000B Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지)

페이지 인쇄

3) Attach the PS-B to the Installation Panel with M4 screws.

First, insert the main unit attachment screws into the Installation Panel's

holes, but do not tighten them. Then, place the PS-B main unit on the panel so

that the bracket holes and the screw heads align. Next, slide the PS-B down so

that the main unit is supported by these attachment screws. Last, tighten the

screws until the PS-B is secured in place.

Do not use excessive force when tightening the main unit attach-

ment screws. The torque required is from 1.0 to 1.2N•m.

Attach-

ment

Screws

Vertical Installation

Wiring the PS-B

Connecting the Power Cord

(Front View)

Power Input Terminals

Connecting these two termi-

nals provides AC100V/

AC240V.

L= Live and N= Neutral

(screw size: M3)

This terminal is connected

to the PS-B's frame (chas-

sis).

• To prevent electric shocks, be sure to turn the PS-B's power supply

OFF before connecting the power cord.

• To avoid the dangers of fire, electric hazards and equipment damage,

be sure to use only the specified power supply voltage when operat-

ing the PS-B.

Attach-

ment

Screws

Horizontal Installation

Power Switch

WARNINGS

Attach-

ment

Screws

Power Terminals

PS-2000B