Digital Electronics Corporation PS365XA-HD40 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Digital Electronics Corporation PS365XA-HD40에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Electronics Corporation PS365XA-HD40 8 페이지. Hard disk unit

페이지 인쇄

Installation

• Shock Danger! Be sure to unplug the PS-A unit from its power supply prior to

installing the HDD unit.

When attaching the HDD to the PS-3650A

• Since the HDD unit is a precision instrument that has a low

resistance to shocks, be sure it is neither hit by nor pressed strongly

against another object when installing it.

• Even when the PS-A unit's screen display disappears, the power

might be distributed inside (such as the "Standby" status etc). Be

sure to confirm that the power supply switch on the rear side of the

PS-A unit is OFF.

(1) Turn off the power switch of the PS-A

unit, remove the power cable. Put the

PS-A on the horizontal place while the

display side of it is downside.

(2) Unscrew the screws (2) from the

Expansion Board Cover, and remove

the Cover.

• When using the PCI

board, it is required to

remove the Expansion

Board Support first.

Then remove the

Expansion Board

Cover and the PCI

board.