Digital Electronics Corporation PS365XA-HD40 빠른 시작 매뉴얼 - 페이지 7
{카테고리_이름} Digital Electronics Corporation PS365XA-HD40에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Electronics Corporation PS365XA-HD40 8 페이지. Hard disk unit
페이지 인쇄When attaching the HDD to the PS-3711A
PS-A unit's Rear Cover
IDE I/F
IDE I/F
7
(3) Insert the HDD unit cable connector
completely into the IDE I/F.
Attach HDD unit using four (4)
attachment screws.
The torque should be 0.5 to 0.6 N•m.
(4) Replace the PS-A unit's Rear Cover
and reattach five (5) attachment
screws.
The torque should be 0.5 to 0.6 N•m.
(1) Place the PS-A unit face down and
unscrew eight (8) attachment screws.
(See diagram).
(2) Lift the PS-A unit's Rear Cover off of
the PS-A unit.
(3) Insert the HDD unit cable connector
completely into the IDE I/F.
Attach the HDD unit using four (4)
attachment screws.
The torque should be 0.5 to 0.6 N•m.
(4) Replace the PS-A unit's Rear Cover
and reattach eight (8) attachment
screws.
The torque should be 0.5 to 0.6 N•m.