Digital Electronics Corporation PL-FD210 설치 매뉴얼

{카테고리_이름} Digital Electronics Corporation PL-FD210에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Electronics Corporation PL-FD210 7 페이지.

Installation Guide

The PL-FD210 (FDD Unit) is an internally mounted 3.5 inch floppy disc drive

unit, designed for use with Proface's Panel Computer, hereafter referred to as

the "PL."

Corresponding PL unit: PL-X900 Series Units(4Slot type), PL-X920 Series Units

All product names used in this document are the trademarks of their respective

manufacturers.

Pro-face: Digital Electronics Corporation

! ! ! ! !

• Be sure to confirm that the PL unit's power cord is disconnected prior to

installing PL-FD210, in order to prevent electrical shock.

• Do not attempt to modify the PL-FD210, due to the danger of fire or electrical

shock.

• Prior to installing the PL-FD210, be sure to read this Installations Guides' "2.

Installation" section completely to insure that this unit is correctly installed.

To Prevent Accidents

• Since the PL-FD210 is a precision instrument, be sure that it is neither hit by nor

pressed strongly against another object.

• Be sure that water, liquids, or metal particles are not allowed to contact or enter

this unit. Either of these may cause either a breakdown or an electrical shock.

• Do not install or operate this unit in a location where there is direct sunlight,

excessive heat, dust or vibration.

• Do not store or operate this unit near chemicals, or where there are chemical

fumes.

• Do not use the PL-FD210 in locations where corrosive gasses are present.

• To prevent damage to file data, be sure to shut down the unit's OS before turning

OFF the main power.

PL-FD210

(4-Slot type)

Warning - Safety Precautions

-1-