BITS TCG-6MVR 사용자 설명서 - 페이지 3

{카테고리_이름} BITS TCG-6MVR에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. BITS TCG-6MVR 4 페이지.

INSTALLING THE SMART STRIP

Ground & Surge Indicator

When this is lit, your equipment is protected. If it's not, it might be:

A bad or unavailable ground, use another outlet.

The surge protection has failed; check http://bitsltd.net or call us.

Control Outlet

Plug your TV or computer here. This outlet controls the SWITCHED OUTLETS; if

the device plugged in here is on, they are on. If off or in sleep mode, they are off.

Constant Hot Outlets

Plug your Cable box, satellite receiver, DVR, fax or cable modem here. These

outlets will only turn off with the power switch.

Automatically Switched Outlets

Plug in all of your other accessories here. These will turn on or off with the

device plugged in the CONTROL OUTLET automatically. Green SWITCHED

LED turns on when Switched Outlets are energized. When the device in the

control outlet is off or in sleep mode, everything here is electronically unplugged,

saving you energy and eliminating "Phantom Current" draw.

SETTING THE SENSITIVITY ADJUSTMENT

You may need to adjust the Smart Strip's

calibrate using a small screwdriver.

First, plug a CONTROL DEVICE and SWITCHED DEVICE into the proper outlets and

test the Smart Strip

DEVICE turns on and off with the CONTROL DEVICE, you're ready to go!

If the switched outlets do not turn on:

Turn on the device that is plugged into the CONTROL OUTLET.

Turn the dial slowly clockwise until the SWITCHED OUTLETS turn on.

Turn off the device in the control outlet; if the SWITCHED OUTLETS are off,

you're done.

If the switched outlets do not turn off:

Turn off the device that is plugged into the CONTROL OUTLET.

Turn the dial slowly counterclockwise until the SWITCHED OUTLETS turn off.

Turn on the device that is on the CONTROL OUTLET; if the SWITCHED

OUTLETS are on, you're done.

by turning the Control Device on and then off. If the SWITCHED

sensitivity. Fortunately, it's easy to