Digital Electronics Corporation PS-2000B Series 설치 매뉴얼 - 페이지 2

{카테고리_이름} Digital Electronics Corporation PS-2000B Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Electronics Corporation PS-2000B Series 17 페이지. Windows 2000 multi language preinstalled hard disk unit
Digital Electronics Corporation PS-2000B Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지)

페이지 인쇄

UL/c-UL (CSA) Application Notes

The PS2000B-41 units are UL/c-UL 60950 recognized products. (UL File No. E171486). Please

pay special attention to the following instructions when applying for UL/c-UL (CSA) approval

for machinery which includes any of these PS-B units.

The PS-B conforms as a component to the following standards:

UL 60950, Third Edition (Standard for Safety of Information Technology Equipment, includ-

ing Electrical Business Equipment)

CSA-C22.2 No. 950-95 (Standard for Safety of Information Technology Equipment, includ-

ing Electrical Business Equipment)

PS2000B-41 (UL Registration Model No.: 3080005-01)

- Equipment with a PS-B mounted in it requires UL/c-UL (CSA) evaluation for the combination

of the PS-B and the equipment.

- The PS-B must be used as a built-in component of an end-use product.

- Use the PS-B indoors only.

- When connecting the PS-B's power cord, be sure to use a cord that is appropriate for the

current and voltage used and that has conductive wires that are 0.75 mm

- When using the PS-B in an end-use product, be sure to install the PS-B unit's power cut-off

switch where the operator can easily reach it.

- Danger of explosion if backup battery is incorrectly replaced. The PS-B unit's battery should

be replaced only with same or equivalent type recommended by the manufacturer. Dispose of

used batteries according to the manufacturer's instructions.

- Be sure the unit the PS-B is built into uses a UL60950 compatible equipment structure.

The PS2000B-41 units are CE marked, EMC compliant products.

• Safety

EN60950

• EMI

EN55011 (Group1 Class A), EN61000-3-2, EN61000-3-3

• EMS (EN61000-6-2)

EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8,

EN61000-4-11

If the following requirements are not met, the PS-B may fail to meet EN60950 standard require-

ments.

• Equipment with a PS-B mounted in it requires UL/c-UL (CSA) evaluation for the combination

of the PS-B and the equipment.

• The PS-B must be used as a built-in component of an end-use product.

• Use the PS-B indoors only.

• When connecting the PS-B's power cord, be sure to use a cord that is appropriate for the

current and voltage used and that has conductive wires that are 0.75 mm

• When using the PS-B in an end-use product, be sure to install the PS-B unit's power cut-off

switch where the operator can easily reach it.

• There is a danger of explosion if the backup battery is incorrectly replaced. The PS-B unit's

battery should be replaced only with the same or equivalent type recommended by the manu-

facturer. Dispose of used batteries according to the manufacturer's instructions.

• Be sure the PS-B unit's enclosure is an EN60950 approved sheet steel structure.

CE Marking Notes

or larger.