Digital Electronics Corporation ST402-AG41-24V 설치 매뉴얼 - 페이지 11

{카테고리_이름} Digital Electronics Corporation ST402-AG41-24V에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Electronics Corporation ST402-AG41-24V 17 페이지.

Installation

Confirm the Installation Gasket's Positioning

It is strongly recommended that you use the gasket. It absorbs vibration in addition

to repelling water.

Place the ST on a level surface with the display panel facing downward. Check that

the ST's installation gasket is seated securely into the gasket's groove, which runs

around the perimeter of the panel's frame.

• Before installing the ST into a cabinet or panel, check that the instal-

lation gasket is securely attached to the unit.

• A gasket which has been used for a long period of time may have

scratches or dirt on it, and could have lost much of its dust and drip

resistance. Be sure to change the gasket periodically (or when

scratches or dirt become visible).

• Be sure the gasket's seam is not inserted into any of the unit's cor-

ners, only in the straight sections of the groove. Inserting it into a

corner may lead to its eventually tearing.

• To ensure the installation gasket's maximum level of moisture resis-

tance, be sure the gasket's seam is inserted as shown into the

panel's bottom face.

Create a Panel Cut and insert the ST into the panel from the front

Unit:mm[in.]

Rear face of ST

118.5

[4.67

Gasket

+0.04

]

Under 4-R3 [0.12]

1.6mm[0.06in.]

to 5.0mm[0.2in.]

E-11