Bitspower touchaqua Sedna O11D 매뉴얼 - 페이지 2

{카테고리_이름} Bitspower touchaqua Sedna O11D에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bitspower touchaqua Sedna O11D 18 페이지. For lian li o11 dynamic series
Bitspower touchaqua Sedna O11D에 대해서도 마찬가지입니다: 설치 매뉴얼 (5 페이지), 설치 매뉴얼 (7 페이지), 설치 매뉴얼 (5 페이지), 설치 매뉴얼 (6 페이지)

페이지 인쇄
Bitspower touchaqua Sedna O11D 매뉴얼
Power Supply and Pump
If need be
O-Ring(60×56×2)
Conduit
G1/4 thread plug
Water conduit modules
M4×16mm Screw
O-Ring(54×50×2)
M4×16mm Screw
Hole offset block(CPU)
SPECIFICATION
Rated voltage：12V DC
Power consumption：15W
Maximum flow：11±15% L/min
Noise：≤ 40dBA
PWM：Yes
MTBF：15000 hours
Warranty：2 years
Dimension: 62 x 62 x 46.7mm
Maximum lift of the water pump: 5.5±0.5m
※ When installing the GPU, it is necessary to remove the
conduit module, and then install the corresponding
fittings.
※ The position of the Hole position offset block can be
adjusted to correspond to the CPU installation
position of different motherboards.
※When installing the radiator, it is necessary to
[ 2 ]
remove the conduit module, and then install the
corresponding fittings.