Bitstorm Bad Boy Xtreme BB-XABC75 설치 및 운영 매뉴얼 - 페이지 13

{카테고리_이름} Bitstorm Bad Boy Xtreme BB-XABC75에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bitstorm Bad Boy Xtreme BB-XABC75 17 페이지.

Bitstorm Inc.

displayed on connected devices.

5) Power off. Tip: You can simply remove the barrel power plug from DUO.

Verify that the Port's green power LED turns off.

6) Reconnect power and wait sufficient time for the devices to fully restart.

Your Xtreme should now be restored to original default settings.

Appendix E - Computer Ethernet Port Settings

Accessing the settings for your computer's Ethernet port are described here for various

operating systems. Please keep in mind that as revisions to operating systems are re-

leased, exact naming of buttons and fields may change. As always, use your computer's

User Guide as your primary source of information.

XP:

'Start' > 'Control Panel' > 'Network Connections'. Right click your adapter, se-

lect 'Status'. Click 'Properties' then scroll the list, select 'Internet Protocol (TCP/IP)' and

then click 'Properties'. Ensure that the 'Obtain an IP address automatically' and 'Obtain

DNS server address automatically' radio buttons are selected.

Vista:

'Start' > 'Control Panel' > 'View network status and tasks' under 'Network and

Internet' > 'View Status' > 'Properties' then scroll the list, select 'Internet Protocol Version

4 (TCP/IPv4)' and then click 'Properties'. Ensure 'Obtain an IP address automatically'

and 'Obtain DNS server address automatically' radio buttons are selected.

Windows 7: 'Start' > 'Control Panel' > 'View network status and tasks' under

'Network and Sharing Center' > 'Change adapter settings'. Right click on 'Local Area

Network' > 'Properties' then scroll the list, select 'Internet Protocol Version 4 (TCP/IPv4)'

and then click 'Properties'. Ensure that the 'Obtain an IP address automatically' and

'Obtain DNS server address automatically' radio buttons are selected.

Linux:

'System' > 'Preferences' > 'Network Connections'. On the 'Network Connec-

tions' screen, select the adapter and click 'Edit'. Select the 'IPv4 Settings' tab and ensure

that 'Automatic (DHCP)' is selected.

Mac OS X:

icon. In the Location drop-down list, select 'Automatic'. In the 'Show' drop-down list, select

Built-in Ethernet. Select the TCP/IP tab. Configure TCP/IP to use DHCP. (Mac OS X

v10.2: In the 'Configure' drop-down list, select 'Using DHCP', Mac OS X v10.3: In the

'Configure IPv4' drop-down list, select 'Using DHCP'). Click 'Apply' button.

Mac OS 8/9: From the Apple menu, select 'Control Panel'. Select 'TCP/IP'. If a window

opens with the message "TCP/IP is currently inactive", click the 'Yes' button. In the

'Connect Via' drop-down list, select 'Ethernet'. In the 'Configure' drop-down list, select

'Using DHCP Server'. Close the TCP/IP(LAN) window. Click 'Save' button.

From the Apple menu, select 'System Preferences'. Click 'Network'

www.bitstorm.com

Bad Boy Xtreme