Bittel 38 Series 사용자 설명서 - 페이지 2

{카테고리_이름} Bittel 38 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bittel 38 Series 8 페이지. 38 series
Bittel 38 Series에 대해서도 마찬가지입니다: 사용자 설명서 (4 페이지)

We bring good things to Hotel/Motel

Thank you for purchasing a Bittel product.

UNPACKING YOUR PHONE

This package should contain the following:

•

38 Series base unit

•

Faceplates

•

Handset

•

Coiled handset cord

•

Straight line cord

•

Manual (no manual inside)

The 38 Series is designed for hotel applications behind a registered PBX system in hotel.

A correct modular jack is required for connecting the telephone. If you do not have the

correct modular jack, one may be obtained at minimal cost at a local hardware store,

discount store or home center.

1) Located on the left side of the 38 Series phone is a modular jack. Insert one end of the

coiled handset cord into this jack (you will hear the coil cord click when properly

inserted.)

2) Insert the other end of the coiled handset cord into the modular jack on to the handset.

3) Turn the telephone so the back panel (bottom) is facing you. Insert either end of the

line cord into the jack on the back of the telephone labeled "TO TEL".

4) Insert the other end of the line cord into a telephone wall jack.

Once your telephone is connected, place the paper faceplate over the keys. The

plastic overlay slips into place by hooking the tabs on the overlay into the recessed

slots located on both sides. The overlay is easiest to insert when the left or right side

tabs are inserted first, and the middle of the overlay is slightly bent to allow for

insertion of the other tabs.

Controls, Connections and Function keys

(1) Handset Wall Mount Clip –

(2) Hook Switch.

(3) Insert hole for placard.

Provides access to the telephone line for connection of modem, fax, or

(4) Data Port

–

answering machine.

_______________________________________________________________________

_BITTEL

Clip to hold handset on hook in wall mount application

Page 2 of 8

38 SERIES