Bittel 68-10S(3) 사용자 설명서 - 페이지 3
{카테고리_이름} Bittel 68-10S(3)에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bittel 68-10S(3) 7 페이지.
페이지 인쇄
Details see below picture
1
2
1 to connect the power adapter
2 to connect the RJ11 telephone line port
3 to connect the UNOMedia to Tel Port
3. Operation
3.1 Placing a Call
1) Lift the handset or press the SPEAKER key, then
dials the desired number or certain service button.
2) To end the call by putting the handset back to the
cradle or press SPEAKER button again.
3.2 Receiving New Call
1) When the phone rings, just please pick up the
handset or press Speaker button
2) when one line has a call and another new call coming,
just press the accordance line key to answer the new
call and another line hang up automatically.
Press the HOLD key if users like to hold the current
call, then press the accordance line key to resume.
3.3 Adjusting Volume
During the call, press VOL+/- key to adjust the volum
level of handset and Speaker. Handset volume resumes
3
---- Page 3----
to low level and speaker stored the current level after the
telephone on-hook.
3.3 Handset call and Speaker Call Inter-Converting
1) From handset to speaker
Just press SPKR key and put the handset on the cradle
2) From speaker to handset --Just lift handset
3.4 Three-Way Conference
1) Press HOLD key to hold the current line then
connect another line, after that please press
CONF key enter into three-way conference
mode.
2) In conference mode, press the accordance
LINE key to relieve the conference mode and
talk with one party. Or press HOLD key to hold
the two lines and then press the desired line key
to talk with the selected line, then press CONF
key to resume the conference mode.
3.5 Redial
Lift the handset or press Speaker button, then press
REDIAL key to dial the last number dialed but after five
minutes the number will disappear automatically, which is
in order well keep the guest's privacy.
3.6 Hold
Off-hook mode, press HOLD key (the accordance LED
indicator light) and put the handset back, the current line
in hold mode, off-hook again can relieve the hold mode.
If paralleled telephone answer the call, the original phone
will detect the current status and relieve the hold mode
and realize on-hook.